Specifications

English-14
The following shows an example of the case when the resolution of QXGA (1536 x 2048) is selected for both INPUT1 and
INPUT 2.
By pressing the MENU button and switching a port, both screens are active when INPUT 1 + INPUT 2 is selected.
INPUT 1 INPUT 2 INPUT 1 + INPUT 2
The following shows an example of the case when the resolution of 3072 x 2048 is selected for INPUT 1 and QXGA
(1536 x 2048) is selected for INPUT 2.
By pressing the MENU button and switching a port, only the screen related to INPUT 1 (the resolution of 3072 x 2048) is active
when INPUT 1 + INPUT 2 is selected. This combination exceeds the number of pixels of the LCD panel to show both INPUT 1
and INPUT 2 screens.
INPUT 1 INPUT 2 INPUT 1 + INPUT 2
Input source switching
Input source of each input port of INPUT 1 and INPUT 2 can be switched.
Input port Input Source
Input 1 DisplayPort 1 DVI 1
Input 2 DisplayPort 2 DVI 2
This operation is available only when “ENABLE FUNCTIONS” of the direct OSD menu setting is set to “Enable Switching Input
Source” or “Enable Both Functions”.
The procedure to switch input source depends on the “INPUT SOURCE BUTTON MODE” selected.
When “Separate Mode” is selected for INPUT SOURCE BUTTON MODE
“Separate mode” allows separate switching of the input source of INPUT 1 and INPUT 2.
Press the minus (-) button on the front bezel without displaying the OSD menu and the input source of INPUT 1 is switched.
The following shows an example of the case when Displayport is selected for the input source of both INPUT 1 and Input 2, and
the input source of INPUT 1 is switched to DVI.