Specifications

English-21
English
DIGITAL LONG
CABLE*
2
(DVI/HDMI input only)
Compensates for image degradation caused by using a long cable.
A lower number produces less compensation.
DIGITAL LONG
CABLE*
2
(DP/Mini-DP
input only)
Compensates for disturbed image caused by using a long DisplayPort cable.
There are 2 possible settings, 1 and 2. Setting “2” produces a better result, but may
reduce display colors. The default setting is “1”.
LONG CABLE
CAPABILITY*
(Analog input only)
R-H.POSITION: Adjusts the position of the red component of the image.
Press “LEFT” or “RIGHT” to adjust.
G-H.POSITION: Adjusts the position of the green component of the image.
Press “LEFT” or “RIGHT” to adjust.
B-H.POSITION: Adjusts the position of the blue component of the image.
Press “LEFT” or “RIGHT” to adjust.
R-FINE: Adjusts the “FINE” setting of the RED component of the image.
Press “LEFT” or “RIGHT” to adjust.
G-FINE: Adjusts the “FINE” setting of the GREEN component of the image.
Press “LEFT” or “RIGHT” to adjust.
B-FINE: Adjusts the “FINE” setting of the BLUE component of the image.
Press “LEFT” or “RIGHT” to adjust.
R-SHARPNESS: Adjusts the sharpness of the red component of the image.
Press “LEFT” or “RIGHT” to adjust.
G-SHARPNESS: Adjusts the sharpness of the green component of the image.
Press “LEFT” or “RIGHT” to adjust.
B-SHARPNESS: Adjusts the sharpness of the blue component of the image.
Press “LEFT” or “RIGHT” to adjust.
Tag4 AUTO ADJUST*
,
*
1
(Analog input only)
Automatically adjusts the Image Position and H.SIZE settings and FINE settings.
Press “SELECT” to activate Auto Adjustment. Please use test pattern, which is included
in the enclosed CD-ROM.
SIGNAL ADJUST*
(Analog input only)
Determines when the auto adjustment is activated automatically.
The choices are “SIMPLE” and “FULL”. Press “LEFT” or “RIGHT” to select.
H-size, Fine, H/V Position Contrast
SIMPLE O X
FULL O O
O: Automatic Adjustment X: No Automatic Adjustment
NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.
AUTO ADJUST
LEVEL*
(Analog input only)
Determines the automatic adjustment level for AUTO ADJUST. The choices are “SIMPLE”,
“FULL” and “DETAIL”. Press “LEFT” or “RIGHT” to select. Refer to the below table.
Size, Fine, Position Contrast Black Level Time
SIMPLE O X X 1 second
FULL O O X 1.5 seconds
DETAIL* O O O 5 seconds
O: Automatic Adjustment X: No Automatic Adjustment
* “DETAIL” activates automatic long cable (skew, peaking) adjustment.
A-NTAA SW*
(Analog input only)
The Advanced No Touch Auto Adjust function is able to recognize new signals even when
neither the resolution nor the refresh rate has changed. If several PCs are connected
to the monitor, and each transmit very similar (or even the same) signals in terms of
resolution and refresh rates, the monitor recognizes that there is a new signal and
automatically optimizes the picture without the need for any action on the part of the user.
OFF: A-NTAA is disabled.
ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal
settings for the new signal. If no change in the signal is detected then A-NTAA does not
activate. The screen will be blank while the monitor optimizes the signal.
OPTION: Functions the same as ON, except that the screen does not go blank when the
monitor makes adjustments for changes in signal, allowing the monitor to display the new
signal faster. When using an external switching device to connect 2 or more PCs to the
monitor, using the ON or OPTION settings is suitable.
AUTO CONTRAST*
,
*
1
(Analog input only)
Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.
Any adjustment requires the image to have white portions.
CONTRAST*
(Analog input only)
Adjusts the image brightness and contrast in relation to the background.
Press “LEFT” or “RIGHT” to adjust.
* Only for MD242C2.
*
1
This item will not be reset during a FACTORY PRESET.
*
2
Only for MD302C4.