User's Manual

English-5
Parts Name and Functions
Front Panel
1 2 3 4 5 6 7 8
OUT I N RS- 4 8 5
POWER LED D ISPLAY OU TP UT DVI
LE D
-
VD 1 V I D EO D I STR IBUTOR
POWER
LED DISPLAY OUTPUT
DVI
1 2 3 4 5 6 7 8 OUT IN RS- 485
1 2 3 4 5
1
Power lamp
Lights up (red) when the power is ON.
2
LED Display lamp
The port connected to the LED module lights up (green).
3
DVI Output lamp
The port connected to the DVI input device lights up (orange).
4
DVI Input lamp
Lights up (orange) with an image signal is input to the DVI input terminal.
5
RS-485 lamp
Lights up (orange) when a command is sent or received.
Rear panel
1 2 4 5
8 7 6
3
1
Power Input Connector
Plug in the power cord here.
2
Power Switch
Turns ON or OFF the power. This device has no standby function.
3
Cooling Fan Vent
Vent for the cooling fan. Do not cover the ventilation.
4
DVI Input
The DVI input terminal. Connect a digital output device here.
5
DVI Output
The DVI output terminal. This is used when connecting this device in a cascaded
connection.
6
DVI Output (for LED Module)
DVI output for the LED module. Connect to the LED module's DVI input terminal
with a dual-link DVI cable.
7
Control Input/Output (RJ-45)
The control input/output terminal. Connect a LAN cable here using the included
RS-485 adapter.
8
Control Input/Output (RJ-45)
The control input/output terminal. This is used when connecting this
device in a cascaded connection. Do not connect the control input/output
terminal or USB/RS-485 adapter's RJ-45 for this device to a network
environment.