User's Manual

32
7.9. “ RF_COLORTONE ” Control procedure
7.9.1. Color temperature Control (AV , S-video , Component mode)
CMD Data1 Data2 Data3 Data4 Data5
Command
(0xF5)
Target
(0x88)
Monitor ID
(0x00)
CMD
(0xFE)
Parameter
(0x08)
Value
Command (0xF5) : Start bit
Target (0x88) : Set bit
Monitor ID (0x00) : Default value -> 0x00
CMD (0xFE) : command data
Parameter(0x08) : ‘ RF_COLORTONE ’ parameter
Value : Data value
1 : cool2
2 : cool1
3 : normal
4 : warm1
5 : warm2
7.9.2. Current RF_COLORTONE state read (AV , S-video , Component mode)
CMD Data1 Data2 Data3 Data4
Command
(0xF4)
Target
(0x89)
Monitor ID
(0x00)
CMD
(0xFE)
Parameter
(0x08)
Command (0xF4) : Start bit
Target (0x89) : Get bit
Monitor ID (0x00) : Default value -> 0x00
CMD(0xFE) : command data
Parameter (0x08) : ‘ RF_COLORTONE ’ parameter
CMD Data1
Command
(0xF1)
Value
Command (0xF1) : Start send bit
Value : Current RF_COLORTONE getting value
1 : cool2
2 : cool1
3 : normal
4 : warm1
5 : warm2