User's Manual

31
7.8. “RF_PICTUREMODE” Control procedure
7.8.1. Picture Control (AV , S-video , Component mode)
CMD Data1 Data2 Data3 Data4 Data5
Command
(0xF5)
Target
(0x88)
Monitor ID
(0x00)
CMD
(0xFE)
Parameter
(0x07)
Value
Command (0xF5) : Start bit
Target (0x88) : Set bit
Monitor ID (0x00) : Default value -> 0x00
CMD (0xFE) : command data
Parameter(0x07) : ‘ PICTUREMODE ’ parameter
Value : Data value
0 : User
1 : dynamic
2 : standard
3 : movie
4 : mild
7.8.2. Current Picture state read (AV , S-video , Component mode)
CMD Data1 Data2 Data3 Data4
Command
(0xF4)
Target
(0x89)
Monitor ID
(0x00)
CMD
(0xFE)
Parameter
(0x07)
Command (0xF4) : Start bit
Target (0x89) : Get bit
Monitor ID (0x00) : Default value -> 0x00
CMD(0xFE) : command data
Parameter (0x07) : ‘RF_PICTURE ’ parameter
CMD Data1
Command
(0xF1)
Value
Command (0xF1) : Start send bit
Value : Current Picture getting value
0 : User
1 : dynamic
2 : standard
3 : movie
4 : mild