Display Solutions Notebook Computer User's Guide Versa L320

Using the BIOS Setup Utility 3-27
Looking at Switch Settings
The following figure shows the default switch settings. Switch setting descriptions
follow the figure.
Default switch settings
Never use a pencil to change switch settings. Residue from
the pencil can damage the system.
Using a fine-tipped object to gently change a switch setting between “ON” or “OFF.”
Switch 1, Keyboard Select — The default setting is “ON” for U.S. keyboard.
Switch 2, Keyboard Select — The default setting is “OFF” for U.S. keyboard.
Switch 3, Reserved for Factory Use — The default setting is “OFF.”
Switch 4, Password Override Switch — The default setting is “OFF.” If you forget
your password and cannot access the data on your NEC Versa, change the setting to
“ON” to erase your current password.
Switch 5, Reserved for Factory Use — The default setting is “OFF.”