Datasheet

CONFIGURATION GUIDE – NEC EXPRESS5800/GT110d

NEC Corporation Revision 2.1, January 2012 18

6.2 Tape / RDX Configuration

6.2.1 DAT / USB

Category

Product Name / Description

Part Number

Controller

Internal USB Controller

1 x USB port or 1 x pin-header for front panel USB

(Standard)

Cable

Required

Internal USB Cable

1x Internal USB to 1x USB device

K410-254(00)

Internal USB Cable

1x pin-header for front panel USB to 1x USB device and 1x front

panel USB port

NOTE:

The cable is required to install internal flash memory and USB

tape drive.

A USB tape drive occupies one front USB port.

K410-245(00)

Drive

2 bays available

Internal DAT (USB)

DDS3 / DDS4 / DAT72, Native capacity 36 GB

NOTE: DDS1 / DDS2 format are not supported

N8151-69

Internal DAT (USB)

DDS4 / DAT72 / DAT160, Native capacity 80 GB

NOTE: DDS1 / DDS2 /DDS3 format are not supported

N8151-78

Internal DAT (USB)

DAT160 / DAT 320, Native capacity 160 GB

NOTE: DDS1 / DDS2 / DDS3 / DDS4 / DAT72 / WORM DAT160

format are not supported

N8151-99

6.2.2 RDX