User's Manual

4-16 System Configuration
LAN Controller
When you select “LAN Controller” in the Advanced menu, the following screen appears.

Refer to the table below for information on options.

Option Parameter Description
LAN Controller
ᴾ
[Enabled]
Disabledᴾ
If “Disabled” is selected, chip stays
in the reset status. In this status, the
LAN Controller is totally disabled
and not recognized by the PnP OS.
Option ROM Scan
ᴾ
[Enabled]
Disabledᴾ
If “Enabled” is selected, the
extended ROM of the device will be
initialized.
[ ]: Factory-set

