User's Guide

1. Installing Internal Optional Devices
Express5800/R120f-2M User’s Guide
47
Chapter 2 Preparations
1.8
Removing Support Bar
You need to remove support bar when installing or removing the following component:
DIMM (memory module) Processor (CPU)
2.5-inch additional HDD cage PCI card
Flash Backup Unit for RAID Controller 3.5-inch Backup device
1. See steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Remove the two screws from support bar.
3. Lift the support bar, and remove it from the server.