User's Guide

4. Names and Functions of Parts
Express5800/R120f-2M User's Guide
25
Chapter 1 General Description
4.
Names and Functions of Parts
This section describes the names of the server parts.
4.1
Front View (With Front Bezel)
(1) Front Bezel
The cover to protect the front of the server. This cover can
be locked with the provided Bezel Lock Key.
(2) Key Slot
The slot for Bezel Lock Key that is used to lock Front Bezel.
(3) LINK/ACT LED
This LED turns on when the server is connected to the
network. (See page 34.)
(3)-1: LAN connector 1
(3)-2: LAN connector 2
(3)-3: LAN connector 3
(3)-4: LAN connector 4
LEDs for LAN3 and LAN4 are lit when optional LOM card
(N8104-154/156) is installed.
(4) Power Capping LED
This LED indicates ECO status of the server.
(5) STATUS LED 1,2
This LED indicates the server status. (See page 32.)
(6) Unit ID (UID) LED
This LED turns on when UID Switch is pressed.
Commands
from the software also cause it to turn on or flash.
(See page 34.)
(7) POWER LED
This LED indicates power status of server. (See page 32.)
(1)
(2)
(3) (4) (5) (6) (7)