User's Guide

1. Specifications
Express5800/R120f-2M User’s Guide
145
Chapter 4 Appendix
N code
N8100-
779F 931F 933F
Power supply unit
Not pre-installed (selectable option),
AC power supply unit
460W/800W/1000W 80 PLUS® Platinum compliant (bipolar grounded outlet)
(hot-plug available) (Max: 2)
AC100V/200V±10%, 50/60Hz±3Hz (Power cable is a required option.)
1000W 80 PLUS® Titanium compliant (bipolar grounded outlet) (hot-plug
available) (Max: 2)
AC100V/200V±10%, 50/60Hz±3Hz (Power cable is a required option.)
Power consumption
(100V at maximum configuration, at 25ºC high-load state)
800VA/794W 836VA/830W 841VA/835W
Power consumption
(100V at maximum configuration, at maximum power)
997VA/990W 1004VA/997W 1006VA/999W
Environmental requirements
Temperature/Humidity
Operating: 10 to 40°C / 20 to 80%,
Storage: –10 to 55°C / 20 to 80% (no condensation either when operating or
when stored)
Main accessories
EXPRESSBUILDER (NEC ESMPRO Manager) (Windows), NEC ESMPRO
ServerAgentService (Windows), User's Guide (electronic document)
included), Getting Started, Safety Precautions and Regulatory Notices,
one-touch rack rail, and front bezel
Installed OS –
Supported OSs
Microsoft Windows Server 2008 Standard (RTM, SP2 or later), Microsoft
Windows Server 2008 Enterprise (RTM, SP2 or later), Microsoft Windows
Server 2008 R2 Standard, Microsoft Windows Server 2008 R2
Enterprise, Microsoft Windows Server 2012 Standard, Microsoft
Windows Server 2012 Datacenter, Microsoft Windows Server 2012 R2
Standard, Microsoft Windows Server 2012 R2 Datacenter, VMware
ESXi 5.1 Update 2, VMware ESXi 5.5 Update 2
*1 If you do not intend to install an internal DVD-ROM or an internal DVD SuperMULTI in all systems, prepare at least one external DVD-ROM per
system for maintenance and OS reinstallation purposes.
*2 Prepare this if required. For the principal uses of a Flash FDD, refer to the notes on Flash FDD in the Maintenance Guide.
*3 Minimum configuration for operation (1x CPU, 2x DIMM, 1x HDD, 1x Power supply unit)
*4 To install PCI card of full length (312 mm) in slot #2C, N8116-37 Full-length PCI Card Kit is required.
*5 Redundant fan configuration is available in an environment where ambient temperature is 10 to 35ºC. If you want to use the server in an
environment where ambient temperature is 40ºC, you need to prepare N8181-125 Additional Redundant Fan Unit.