User Guide

- 32-
Power Save (*3)
Enable/Disable
Disable
Serial Port A
Serial Port A
Enable/Disable
Enable
Serial A Base I/O
2E8h
2F8h
3E8h
3F8hBlank
3F8h
Serial A Interrupt
IRQ 3
IRQ 4
IRQ 4
Serial Port B
Serial Port B
Enable/Disable
Enable
Serial B Base I/O
2E8h
2F8h
3E8h
3F8h
2F8h
Serial B Interrupt
IRQ 3
IRQ 4
IRQ 3
Console
Redirection
BIOS Redirection Port
Disabled
Serial Port A
Serial Port B
Disabled
Terminal Type
VT100+
VT-UTF8
PC-ANSI
VT100+
Baud Rate
9600
19200
57600
115200
115200
Data Bits
7
8
8
Parity
None
Even
Odd
None
Stop Bits
1
2
1
Flow Control
None
Hardware RTS/CTS
Hardware RTS/CTS
Continue C.R. after POST
Enable/Disable
Enable
*1: The value might be different according to the system.
*2: The value that is set when shipping. The value might be different according to the system.
*3: If the “Power Save” is enabled, then Power ON following Power OFF by the Power Cycle
will not be performed.