User's Manual

58
Port number list
2.
NEC ESMPRO ServerAgentService uses the following port numbers.
To use NEC ESMPRO ServerAgentService with Windows Firewall enabled, open the required ports.
[NEC ESMPRO Manager <-> NEC ESMPRO ServerAgentService]
Function
NEC ESMPRO
Manager
Direction
NEC ESMPRO
ServerAgentService
Remarks
Auto Registration
Server Monitoring (WS-MAN/HTTP)
Auto-assignment
->
<-
5985/tcp
(80/tcp)*
HTTP
Auto Registration
Server Monitoring (WS-MAN/HTTPS)
Auto-assignment
->
<-
5986/tcp
(443/tcp)*
HTTPS
SNMP report to Manager
162/udp
<-
Auto-assignment
snmp-trap
TCP/IP report to Manager
31134/tcp
<-
->
Auto-assignment
CIM-Indication report to Manager
6736/tcp
(configurable)
<-
Auto-assignment
(*) If you installed NEC ESMPRO ServerAgentService on Windows Server 2008, port HTTP/80 and
HTTPS/443 are used.
[NEC ESMPRO ServerAgentService <-> Mail Server]
Function
NEC ESMPRO
ServerAgentService
Direction
Main Server
Remarks
Express Report Service (Internet Mail)
Auto-assignment
->
<-
25/tcp
SMTP
<-
->
110/tcp
(POP3)*
(*) Only when "POP before SMTP" is used.
- In case of two-way protocol, upper arrow shows that connection starts, and lower arrow shows that
connection turns.
- The port number used by TCP/IP report to Manager or Express Report Service can be changed in set
screen of report.
- In case of port number unknown, unused port is used to start connection.