User's Manual

56
8. By which to use HTTP or HTTPS to connect with NEC ESMPRO Manager, run the
following WinRM command to use NEC ESMPRO ServerAgentService.
If you use HTTP to connect with NEC ESMPRO Manager;
winrm set winrm/config/service @{AllowUnencrypted="true"}
If you use HTTPS to connect with NEC ESMPRO Manager;
See "Chapter2 3.3 HTTPS Setting"
winrm set winrm/config/service @{AllowUnencrypted="false"}
♦ Monitoring component's hardware from NEC ESMPRO Manager
Registering BMC (EXPRESSSCOPE Engine) to NEC ESMPRO Manager and setting up SNMP Alert
configuration are required to monitor component's hardware error.
♦ Restart after Hardware trouble occurs
When abnormality of Hardware is detected, OS is shutdown.
When OS is restarted without action/recovering trouble after shutdown, shutdown is done just after the
restart.
♦ Memory leak (Windows Server 2008)
Memory leak occurs intermittently irregularly on Windows Server 2008.
The detailed information is described on Microsoft Product Support Services.
Check the contents.
[Article ID: 955515]
http://support.microsoft.com/kb/955515/en-us
Execute the above hotfix or Service Pack 2.
NEC recommends Service Pack 2.