User's Manual

49
1.2 Hard disk drive / RAID system / File system
♦ Monitoring of RAID system
Monitoring of RAID system uses Universal RAID Utility is a monitoring utility. Refer to several manual of
Universal RAID Utility.
♦ SATA Optical disk drive
In the case of using LSI Embedded MegaRAID, infomation of SATA Optical disk drive does not displayed
of [Information of server state/constitution] of NEC ESMPRO Manager.
♦ Information displayed in "Resource" of SCSI controller
Incorrect information appear in the [Resource] window displayed from [SCSI Controller] of [Information of
server state/constitution] of NEC ESMPRO Manager.
Check the information of resource using "Device Manager" and "System Information (winmsd.exe)" of
OS.
♦ Storage Devices other than SCSI/IDE Device
NEC ESMPRO ServerAgentService does not monitor storage devices other than SCSI/IDE devices (e.g.,
USB device).
♦ Configuration changes to the file system monitoring and storage
monitoring
Set by NEC ESMPRO Manager monitoring interval, hard disk drive pre-failure prediction monitoring
enable/disable, file system free space threshold monitoring does not take effect immediately if you
change. Setting configuration changes after you have changed in the next monitoring interval of
monitoring function of each is enabled.
♦ Monitoring the failures of the tape device is desired
NEC ESMPRO ServerAgentService does not monitor the failures of the tape device. If want to conduct
monitoring, use backup software or tape monitoring application. Using the event monitoring function of
NEC ESMPRO ServerAgentService allows you to monitor the event log of backup software or
applications.