User's Manual

47
♦ Event log which is registered when doing shut down (system)
When you shut down the machine in which NEC ESMPRO ServerAgentService was installed, the
following event log is registered.
Source : Windows Remote Manager
Event ID : 10149
Level : Warning
Description : The WinRM service is not listening for WS-Management requests.
If you did not intentionally stop the service, use the following command to see the WinRM configuration:
winrm enumerate winrm/config/listener
When the WS-Management listener stopped, this event is registered. Windows Remote Manager service
is stopped at shutdown, so this event is registered. Thus, there are no problems to using a system.
♦ Monitors hardware log (SEL)
Monitors hardware log (SEL) by NEC ESMPRO ServerAgentService uses Windows Management
Instrumentation (WMI) Service. Therefore when WMI Service stopped or restarted, NEC ESMPRO
ServerAgentService cannot monitor any more.
When WMI Service stopped or restarted, the following event is registered with event log (Application).
Source : Application Error
Event ID : 1000
Level : Error
Description : Faulting application name: svchost.exe
When WMI Service stopped or restarted, restart the system. Or restart of ESM System Management
Service from Control Panel, then Administrative Tools, then Services.
(NEC ESMPRO ServerAgentService reconnects to WMI Service by restarting ESM System Management
Service)