User's Manual

29
The way to use NEC ESMPRO Manager
Create Self-Signed certificate on PC for management that NEC ESMPRO Manager was installed.
In case of Installing NEC ESMPRO Manager in C:¥Program Files (x86)¥ESMPRO on 64bit OS
"C:¥Program Files (x86)¥ESMPRO¥ESMWEB¥jre¥bin¥keytool" -genkey -keystore
keystore -storepass storepass -validity validity -keyalg RSA -keysize keysize -storetype
pkcs12 -ext EKU=serverAuth -dname “CN=IP Address"
An example: In case of the server's IP Address is 192.168.1.1..
"C:¥Program Files (x86)¥ESMPRO¥ESMWEB¥jre¥bin¥keytool" -genkey -keystore
C:¥temp¥esmpro.pfx -storepass secret -validity 3650 -keyalg RSA -keysize 2048 -storetype
pkcs12 -ext EKU=serverAuth -dname “CN=192.168.1.1"
Tips
● If using makecert.exe, "♦ Register the certificate" is unnecessary.
● In case of on 32bit OS, paraphrase “Program Files (x86)” as “Program Files”.
♦ Register the certificate
Register the certificate by Microsoft Management Console (MMC) on the server that NEC ESMPRO
ServerAgentService was installed.
Tips
In case of the example, esmpro.pfx would be made in C:¥temp. Therefore, create
C:¥temp folder before executing makecert.exe.
1. Store the certificate on the server.
2. Run mmc.exe.
3. Click [File]-[Add/Remove Snap-in].
4. Select [Certificates] and click [Add].
5. Select [Certificates snap-in]-[Computer account] and click [Next].
6. Select [Local Computer] and click [Finish].