User's Manual

26
After Finishing Installation 3.
Be sure to read this page after installing NEC ESMPRO ServerAgentService.
3.1
Operations Check
Setup program of NEC ESMPRO ServerAgentService enable Windows remote management (WinRM) and
change settings. Setup program executes following WinRM commands in installation process.
winrm quickconfig –q
winrm set winrm/config/service @{AllowUnencrypted="true"}
winrm set winrm/config/service/auth @{Basic="true"}
In uninstallation process, setup program does not change these settings. If you need, change settings to use
by WinRM command.
Important
If you use Windows Server 2008 R2 "Pre-installation" model or you install Windows
Server 2008 R2 with "Installation simultaneously with OS installation", it may fail to
set Windows remote management (WinRM) settings. See "Fail registration by
WS-Man with NEC ESMPRO Manager Ver. 6.00", and set manually Windows
remote management (WinRM) settings.