User's Manual

14
Setting of TCP/IP
1.2.2
Set a static IP address for the server.
See Help from Windows for how to set TCP/IP.
Installing of SNMP Service
1.2.3
Installation of SNMP Service is indispensable by Service Mode of NEC ESMPRO ServerAgentService.
The installing of SNMP Service is described below.
Tips
● SNMP Service is not essential function by Non-Service Mode of NEC
ESMPRO ServerAgentService. For details of Service Mode and Non-Service
Mode, see "2.1 Service Mode and Non-Service Mode".
● If uninstall SNMP Service after installation of NEC ESMPRO
ServerAgentService, install SNMP Service again. Then uninstall and install
NEC ESMPRO ServerAgentService.
♦ Windows Server 2012 / Windows Server 2012R2
1. Click [Programs and Features] in [Control Panel].
2. Click [Turn Windows features on or off].
“Add Roles and Features Wizard” window appears.
3. Click [Features].
[Features] but when it cannot be clicked by gray, when [Next] is clicked several times, [Features]
can be clicked now.
4. Check [SNMP Service] check box.
5. Click [Next].
6. Click [Install].
Installing, it becomes more effective, it starts.
7. Click [Close].
Tips
In the case of Windows Server 2012 or later Server Core installation, execute the
following commands by the command prompt.
"Dism /online /enable-feature /featurename:SNMP"