Appendix

ManualsBrandsNEC ManualsserversNEC Express5800/R120f-2M

Appendix C : Logs/Events

The lists of log and event, alert messages that Universal RAID Utility logs to RAID Log and OS Log are described in this

section.

[Event Source, Alert Type]

OS event source name: raidsrv

Source Name on NEC ESMPRO Manager (Windows): raidsrv

Source Name on NEC ESMPRO Manager (Linux, VMware): RAIDSRV

Alert Type : URAIDUTL

[Log]

Mark

Description

R Universal RAID Utility logs this event to RAID Log.

O Universal RAID Utility logs this event to OS log.

[Alert]

Mark

Description

M and MA

Universal RAID Utility sends this event to NEC ESMPRO Manager as alert.

[

Address

] description in [Description]

The [ Address ] description is different from the category of event.

Category of Event

Type

Description

RAID Controller

Battery

Flash Backup Unit

1 [CTRL:%1(ID=%2)]

%1 : Number of RAID Controller

%2 : ID of RAID Controller

Physical Device 2 [CTRL:%1(ID=%2) PD:%3(ID=%4) %5%6]

%1 : Number of RAID Controller

%2 : ID of RAID Controller

%3 : Number of Physical Device

%4 : ID of Physical Device

%5 : Vendor and Model of Physical Device

%6 : Firmware Version of Physical Device

Logical Drive

[CTRL:%1(ID=%2) LD:%3(ID=%4)]

%1 : Number of RAID Controller

%2 : ID of RAID Controller

%3 : Number of Logical Drive

%4 : ID of Logical Drive

Enclosure 4 [CTRL:%1(ID=%2) ENC:%3]

%1 : Number of RAID Controller

%2 : ID of RAID Controller

%3 : Number of Enclosure

Power Supply Unit in Enclosure 5 [CTRL:%1(ID=%2) ENC:%3 POW:%4]

%1 : Number of RAID Controller

%2 : ID of RAID Controller

%3 : Number of Enclosure

%4 : Number of Power Supply Unit

Fan Unit in Enclosure 6 [CTRL:%1(ID=%2) ENC:%3 FAN:%4]

%1 : Number of RAID Controller

%2 : ID of RAID Controller

%3 : Number of Enclosure

%4 : Number of Fan Unit

Summary of content (11 pages)

PAGE 1
Appendix C : Logs/Events The lists of log and event, alert messages that Universal RAID Utility logs to RAID Log and OS Log are described in this section. [Event Source, Alert Type] OS event source name: raidsrv Source Name on NEC ESMPRO Manager (Windows): raidsrv Source Name on NEC ESMPRO Manager (Linux, VMware): RAIDSRV Alert Type : URAIDUTL [Log] Mark Description R Universal RAID Utility logs this event to RAID Log. O Universal RAID Utility logs this event to OS log.
PAGE 2
[priority, facility] The messages of Universal RAID Utility have the following priority and facility on Linux or VMware ESX.
PAGE 3
Event ID Severity Description Log Alert Summary Deal Method (hex digit) 0201 (400000C9) 0202 (400000CA) 0203 (400000CB) 0204 (400000CC) 0205 (400000CD) 0206 (400000CE) 0207 (400000CF) 0208 (400000D0) 0209 (400000D1) 0210 (400000D2) 0211 (800000D3) Information [Address Type 1 ] The buzzer of RAID Controller is enable. R Information [Address Type 1 ] The buzzer of RAID Controller is disable. R Information R Information [Address Type 1 ] The Rebuild Priority of RAID Controller was changed.
PAGE 4
Event ID Severity Description Log Alert Summary Deal Method Fatal [Address Type 1 ] A Fatal Firmware Error happened to RAID Controller. %1 [Address Type 1 ] RAID Controller property was changed. RO MA RAID Controller Firmware Error Fatal Please replace the RAID Controller. [Address Type 1 ] SAS wide port lost link on SAS Expander. RO MA SAS Port link lost [Address Type 1 ] SAS wide port restored link on SAS Expander.
PAGE 5
Event ID Severity Description Log Alert Summary Deal Method [Address Type 2 ] Detected S.M.A.R.T. Error. RO MA S.M.A.R.T. Error Please replace the Physical Device. Information [Address Type 2 ] Rebuild was started. RO MA Rebuild Started None Information [Address Type 2 ] Rebuild completed. RO MA Rebuild Completed None [Address Type 2 ] Rebuild failed. RO MA Rebuild Failed Please replace the Physical Device. Information [Address Type 2 ] Rebuild was stopped.
PAGE 6
Event ID Severity Description Log Alert Summary Deal Method (hex digit) 0322 (40000142) 0323 (40000143) 0324 (80000144) Information [Address Type 2 ] Rebuild was resumed. R Information [Address Type 2 ] Rebuild was queued.
PAGE 7
Event ID Severity Description Log Alert Summary Deal Method RO MA Initialization Failed Try to initialize again. If it fails again, verify if there are any other error/warning messages regarding RAID system. If you found the other messages, deal with the problem for the messages. After you deal with the problem, try to initialize again. If you don't find any other messages regarding RAID system, the RAID Controller may be faulty.
PAGE 8
Event ID Severity Description Log Alert Summary Deal Method (hex digit) 0418 (400001A2) 0419 (400001A3) 0420 (800001A4) Information [Address Type 3 ] Background Initialization was started. R Information [Address Type 3 ] Background Initialization completed. R 0421 (400001A5) 0422 (C00001A6) Information Fatal [Address Type 3 ] An error was detected in Logical Drive but could not correct.
PAGE 9
Event ID Severity Description Log Alert Summary Deal Method (hex digit) 0434 (400001B2) 0435 (400001B3) 0436 (400001B4) 0437 (400001B5) 0438 (800001B6) 0501 (400001F5) 0502 (800001F6) 0503 (400001F7) 0504 (400001F8) 0505 (800001F9) 0506 (800001FA) 0507 (800001FB) 0508 (800001FC) 0509 (400001FD) 0510 (800001FE) 0511 (400001FF) 0512 (80000200) Information [Address Type 3 ] Background Initialization was queued.
PAGE 10
Event ID Severity Description Log Alert Summary Deal Method 0515 (80000203) Warning [Address Type 1 ] The temperature of Flash Backup Unit is high. RO M 0516 (80000204) Warning [Address Type 1 ] The voltage of Flash Backup Unit is low. RO M 0517 (80000205) 0601 (80000259) Warning [Address Type 1 ] A Fatal Error happened to Flash Backup Unit. [Address Type 4 ] A Warning Error happened to Enclosure. RO MA Unit Please check the Flash Backup Unit.
PAGE 11
Event ID Severity Description Log Alert 0605 (8000025D) Warning [Address Type 5 ] An error happened to the Power Supply Unit of Enclosure. RO MA 0606 (8000025E) Warning [Address Type 6 ] An error happened to the Fan Unit of Enclosure. RO MA 0607 (4000025F) 0701 (400002BD) 0702 (400002BE) Information RO MA Information [Address Type 4 ] The temperature of Enclosure is Normal level. [Address Type 1 ] The Configuration was cleared.