Reference Guide

33
2.2.19 setShutdownPolicy
Syntax:
dscli setShutdownPolicy Component KeyName Value
Description:
Changes shutdown policy of NEC ESMPRO Agent Extension on a managed component.
This command can be used via LAN when NEC ESMPRO Agent Extension service is running on the
managed component.
Options:
Component
Specify the name, the MAC address of LAN port that BMC uses, or the GUID of the managed
component.
KeyName
Specify a key name to be set. See the list below.
Value
Specify a new value to be set. See the list below.
KeyName Contents Value
SCH_ACLINK_STAYON_ENABLE Determine whether to
enable/disable the function that
changes AC-LINK policy
to ”Always Power On” when “OS
shutdown” is executed through
“scheduled running”
0: Disabled
1: Enabled
SCH_AC_LINK Specify AC-LINK Policy.
(This setting works like as
setPowerRestoreDelay
command.)
* Display only. Cannot be set.
-
SCH_DC_OFF_ENABLE Determine whether to
enable/disable the function that
turns the managed component
off forcibly after shutdown OS.
If the managed component is still
DC-ON state after OS shutdown,
set enable to turn it off when
NEC ESMPRO Agent Extension
shutdowns its OS.
0: Disabled
1: Enabled
SCH_DC_OFF_DELAY Specify delay time in minutes to
turn the managed component off
after shutdown OS.
This setting is effective only when
SCH_DC_OFF_ENABLE is
enabled.
5-60
SCH_SHUTDOWN_ENABLE Determine whether to
enable/disable the function which
shutdowns OS when the
managed component is turned on
during the down period specified
through “scheduled running”.
0: Disabled
1: Enabled