User Guide

86
.
Step 4 Click [Next]. The [Check the contents, and
completing the "Create SSD Cache Drive" Wizard]
window appears.
The window shows the contents of SSD Cache Drive to
be created.
To create an SSD Cache Drive with the settings
displayed, click [Finish]. To change the settings , click
[Back].
Click [Finish] to create an SSD Cache Drive and close
the wizard. After the wizard closes, see the Tree View
to check the contents
Click [Back] to cancel the creation of SSD Cache Drive.
raidcmd
Step 1 Connect Solid State Drive(s) used for an SSD Cache Drive to the RAID Controller before executing raidcmd if
required.
Step 2 Execute "mkscd" command with following
parameters.
-c : Number of RAID Controller in which an SSD Cache
Drive is created.
-p : Numbers of the Physical Device(s) used for creating of
SSD Cache Drive.
Ex) Create SSD Cache Drive using the Solid State
Drives (RAID Controller Number is 1, Physical Device Number is e252s6, e252s7).
3
2
>
raidcmd created SSD Cache Drive #2.
Do you continue ? [yes(y) or no(n)] : yes
> raidcmd mkscd –c=1 –p=e252s6,e252s7
raidcmd creates SSD Cache Drive #2
raidcmd mkscd -
c=1 -p= e252s6,e252s7
Step 3 Display the confirmation message. Type "yes" to create an SSD Cache Drive. Type "no" to cancel the creation of
SSD Cache Drive.
Step 4 raidcmd terminates normally when SSD Cache Drive is created successfully. You can check the property of the
created SSD Cache Drive by using "property" command.