User Guide

Step 6

The “Ready to Install the Program” screen appears.

Confirm the modules to be installed displayed on the screen and

click [Install] to start installation. To change the modules to be

installed, click [Back] to reselect the modules.

Step 7 At the completion of the installation, the “InstallShield

Wizard Complete” screen appears. Click [Finish].

Step 8 When the installation completes, "Universal RAID

Utility" is registered to the program list in the [Change or

Remove Programs].

Also, either program or both programs to manage the RAID

Controllers shown below will be registered depending on the

type of the RAID Controller.

- WebPAMPRO Agent