Installation Guide

48
2.
Port numbers / Protocols
NEC ESMPRO Manager uses the following port numbers and protocols.
In case of two-way protocol, upper arrow shows that connection starts, and lower arrow shows that connection
turns.
o. unknown, unused port is used to start connection. In case of port N
[Web Client <->PC for Management]
Web Client PC for Management
Function
Component Port No.
Protocol
/Direction
Port No. Component
Management/
monitoring
web browser Unknown
->
21
TCP
<-
112 (*1) NEC ESMPRO Manager
*1 You can change the port number at the installation or see [Changing the port number].
[PC for Management <->Managed Server]
PC for Management Managed Server
Function
Component Port No.
Protocol
/Direction
Port No. Component
Server Monitoring (Ping) NEC ESMPRO Manager --
ICMP
->
<-
-- OS
BMC Setting
NEC ExpressUpdate
NEC ESMPRO Manager Unknown
TCP
->
443(*1) BMC
<-
Alert from BMC NEC ESMPRO Manager 162
UDP
<-
623 BMC
Server Monitoring NEC ESMPRO Manager 47117 (*2)
UDP
->
<-
623 BMC
Information Collection
(through BMC)
NEC ESMPRO Manager 47117 (*2)
UDP
->
<-
623 BMC
Remote Batch NEC ESMPRO Manager 47117 (*2)
UDP
->
<-
623 BMC
Operation with Command
Line I/F
NEC ESMPRO Manager 47117 (*2)
UDP
->
<-
623 BMC
Power Control NEC ESMPRO Manager 47117 (*2)
UDP
->
<-
623 BMC
Remote Console
(CUI, SOL)
NEC ESMPRO Manager 47117 (*2)
UDP
->
<-
623 BMC
Remote Console
(CUI, non-SOL)
NEC ESMPRO Manager 47115
UDP
->
<-
2069 System BIOS
Remote Wake Up NEC ESMPRO Manager Unknown
UDP
->
10101 LAN Board
Information Collection
(through NEC ESMPRO
Agent Extension)
NEC ESMPRO Manager Unknown
TCP
->
<-
47120-
47129
(*3)
DianaScope Agent
NEC ESMPRO Agent
Extension