Installation Guide

3. Setting Up Windows Server 2012

Express5800/R120e-1M, R120e-2M Installation Guide (Windows)

Chapter 1 Installing Windows

12. When the following window appears, insert the OS installation disc into the disk drive, and then click OK.

13. The server restarts automatically.

If you want to use Internal Flash Memory, press <F3> key when the following message appears during

POST.

Press <F2> Setup, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network

Note

Since the OS installation disc is set in the optical disk drive in Step 12, boot the

system from the optical disk drive having higher boot priority, not from Internal

Flash Memory.

14. Start from the OS installation disc.

If an operating system is already installed on the hard disk drive, press <Enter> key while the message

“Press any key to boot from CD or DVD…” is displayed on the top of the screen.

The boot sequence proceeds and the message “Windows is loading files…” appears.

Note

If “Windows is loading files...” message does not appear, <Enter> key was not

pressed correctly. Reboot and retry.

15. Click Next.