Installation Guide

6. Setup for Solving Problems
Express5800/R120e-1M, R120e-2M Installation Guide (Windows)
248
Chapter 1 Installing Windows
6.3
Installing Network Monitor
Utilizing Network Monitor helps you investigate and manage network troubles.
(This feature is not supported in Windows Server 2012 or later operating systems.)
(1) Setting up Network Monitor
Tips
Windows Server 2008 R2 and Windows Server 2008 do not provide Network
Monitor.
To capture network traces on Windows Server 2008 R2 or Windows Server 2008,
Microsoft Network Monitor must be installed using the procedure described below.
1. Download Network Monitor from the following Microsoft web page:
http://support.microsoft.com/kb/933741/en-us
2. Run the downloaded file to start the installer.
Follow the onscreen instructions to install Network Monitor.
Tips
If the Security Alert message appears, click Run.
In the setup format selection window, select Complete.
Network Monitor installation is now complete.
Tips
To uninstall Network Monitor, use Programs and Features.
(2) Capturing network traces
1. Click Microsoft Network Monitor on the Start menu to start Network Monitor.
2. Click Create a new capture tab... in the Start Page tab or click New on the File menu, click Capture….
A new tab for capturing network traces is created.
3. In Select Networks, select the network whose traces are to be captured.
4. Click Start on the Capture menu to start capturing the network traces.
5. Click Stop on the Capture menu to stop capturing the network traces.
6. Click Save As… on the File menu.
The Save As dialog box appears. Click All captured frames in Frame selection, and then type a folder and
file names.
Tips
The default folder is as follows:
C:\Users\<User name>\Documents\Network Monitor 3\Captures
7. Click Save.
The network trace file is created in the folder specified in step 6.
The setup for capturing network traces is now complete.