Installation Guide

5. Setting Up Windows Server 2008
Express5800/R120e-1M, R120e-2M Installation Guide (Windows)
197
Chapter 1 Installing Windows
Tips
• If using Internal Flash Memory, you do not need to remove the OS installation
media.
• At this time, the message "The Installation media can be a floppy disk, CD,
DVD, or USB flash drive." appears on the screen, use the supplied
EXPRESSBUILDER DVD or Internal Flash Memory.
22. Specify one of the following locations, and then click [OK].
(When using EXPRESSBUILDER, select the optical disk drive. When using Internal Flash Memory,
select the volume of INTER-FLASH.)
When using the N8103-172/173/174 RAID Controller:
− Windows Server 2008 64-bit Edition
\002\win\winnt\oemfd\ws2008x64\megasas2
− Windows Server 2008 32-bit Edition
\002\win\winnt\oemfd\ws2008\megasas2
When using the N8103-168 RAID Controller:
− Windows Server 2008 64-bit Edition
\002\win\winnt\oemfd\ws2008x64\megasas2
− Windows Server 2008 32-bit Edition
\002\win\winnt\oemfd\ws2008\megasas2
23. Select the necessary driver from the driver list shown, and then click [Next].
When using the N8103-172/173/174 RAID Controller:
[LSI MegaRAID SAS 9272-8i]
When using the N8103-168 RAID Controller:
[LSI MegaRAID SAS 9265CV-8i]
Tips
When N8103-168 is used, the name of the RAID controller that appears on a
screen is different from one that is showed on WebBIOS and Universal RAID
Utility. But it is not a problem.
24. If you used EXPRESSBUILDER DVD, remove it and then insert the OS installation media.
25. Select the disk in which the partition will be created, and then click Drive options (advanced)
If a partition has already been created, go to step 28.
26. Click [New], enter the partition size into the size input box, and then click [Apply].
Note
When installing the OS to a disk of over 2,097,152 MB (2 TB), the partition size can
only be set to 2,097,152 MB or less.
27. Select the partition created in step 26, and then click [Format].