User Guide

42
Tips
● If the remote Manager to be set has already been specified as the trap
destination of SNMP service, release the trap destination setting of SNMP
service.
● Exercise care to avoid duplicate setting of the same IP address (or host name)
for trap destination of SNMP service after this setting. If duplicate setting is
made, more than one alert will be reported.
- [Port number]:
The port number used for the communication between sockets can be set. For this number,
the same value must be set to Agent and remote Manager (the default value is 31134 for
both Agent and remote Manager). Do not change the value as long as the default value
works.
Important
● If the default value does not work, set the port number in the range of 6001 to
65535.
● Clicking the [Default] resets the number to the default value (31134).
● If a modification is made, be sure to also modify the setting for the remote
manager. This modification is made in the setting of TCP/IP receive in the
[Receive from Agent (TCP/IP) Setting] dialog of the base setting by executing
AlertManager setting tool on the server in which Manager is installed.
- [OK]:
Set information is added and this dialog box closes.
- [Cancel]:
This dialog box closes with no set information added.
- [Test]:
Test report. Test result can be checked by a message.