User Guide

22
Use Destination Setting window as the base point for the setting.
- Setting destination IDs:
A destination ID is just like a name in an address book. A name can be assigned freely for each
report destination. In the destination ID list, IDs can be added, edited, or deleted.
- Setting destination ID groups:
A destination ID group can be created by grouping a number of destination IDs. In the destination
ID group, ID groups can be added, edited, or deleted.
Bitmap
Reporting measures
destination ID group
- Selection of reporting measures and setting destinations:
One reporting measure can be selected for each destination ID. To set multiple report IDs for one
destination, create multiple destination IDs and group them. When a reporting measure is
selected, a destination can be set. ID cannot be created unless the destination is set. For some
reporting measures, the destination can be tested using the designation setting dialogue.
- Setting report schedules:
A schedule can be set for each destination ID. In the schedule, set a report enabled time zone and
report retry. When a destination is set, the report schedule can be set.
Setting monitor Alerts
3.1.3
The setting of monitor alerts consists of the following four items.
- Setting monitor events (*1)
- Setting monitor alerts (*2)
- Associating monitor alerts with report destinations (*3)
- Report test (*1)
*1 Set in Agent only.
*2 Set in Manager only.
*3 Set in both Agent and Manager.
At installation, monitor alerts and reporting measures have been associated.