User Guide

17
- Writing to file function:
An alert is written into the text file when an alert occurs. The report contents include a detailed
message, support method, and alert type. The message can be edited and the report contents
can be selected at the time of setting.
- Command execution function:
A specified command is executed. AlertManager can pass the specified command alert
information as command line arguments.
- Client report function:
The report method can issue multicasting messages to the client computer in the same domain.
Report contents include a detailed message, support method, and alert type. The report contents
can be selected at the time of setting. This function is only available for Agent.
- Critical error logging function:
A critical error is written into a critical log. A critical log is the log file in which a critical failure of the
system is logged. A message to attract the attention of the user is displayed when the setting is
made in order to write the failure into the critical log. This function only supports NvRAM placed
server.
- Shutdown, reboot:
The system can be shut down and rebooted when the alert occurs. A time elapses before the
system shutdown can be specified. This function is available for Agent only.
Tips
“Client report" method is not supported.
2.5
Receive function of Alert
- Receive Alert from Agent (TCP/IP) function:
This function receives the alert using TCP/IP function. This function is only available for Manager.