User's Guide

1. Installing Internal Optional Devices
Express5800/R120e-1M User’s Guide
89
Chapter 2 Preparations
Slot number
PCIe 3.0
#1A
PCIe 3.0
#1B
PCIe 3.0
#1C
PCIe 3.0
#1D
PCI slot
performance*1
x8 lane x16 lane x8 lane
Transfer bandwidth
(per lane) *1
8Gb/s
Slot size
Dedicated
to RAID
Controller
Full height
Low
profile
Dedicated
to LAN
riser card
PCI card type *2 x8 socket x16 socket x8 socket
Model
name
Product
name
Available card size
Dedicated
to RAID
Controller
Up to 220 mm
Dedicated
to LAN
riser card
Remarks
N8104-137 10GBASE-SFP+ riser card
[PCI Express 2.0(x8)]
－ － － ○
For additional LAN port.
Prepare SFP+ module
[N8104-129] if needed.
Up to two cards
including
N8104-137/128/148/131
can be installed.
N8104-128 10GBASE Adapter (SFP+/2ch)
[PCI Express 2.0(x8)]
－ ○ ○ －
N8104-148 10GBASE Adapter (SFP+/2ch)
[PCI Express 2.0(x8)]
－ ○ ○ －
For additional LAN port.
Prepare SFP+ module
[N8104-129] if needed.
Only one card can be
installed in RHEL6.
Up to two cards
including
N8104-136/137/128/148/
131 can be installed.
N8104-131 10G Converged Network
Adapter (2ch) (10Gbps/Optical)
[PCI Express 2.0(x8)]
－ ○ ○ －
For additional
DCB/FcoE.
SFP+ module is
factory-installed.
StoragePathSavior
supports redundant path
of FC.
Teaming/bonding with
LAN is not available.
Only one port per
system can be used as
LAN of N8104-131.
Only one card can be
installed in RHEL6.
Up to two cards
including
N8104-137/128/131 can
be installed.
N8117-01A Additional RS-232C connector
*3
－ － ○ －
For additional serial port
B (RS-232C).
√: Can be mounted, –: Cannot be mounted
*1 Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).