User Guide

54
4.4
Setting According to Report Receiving Method
[Receive] property sheet of the [Base Setting] dialog is used to select a method from a list and the setting is
made in the dialog displayed by pressing the [Configure].
To report Alert, make settings by clicking the function status bitmap and change to green.
How to Make Setting
Make the setting as follows:
[Receive from Agent (TCP/IP) Setting] dialog is used to set and modify a socket receive.
♦ [Receive from Agent (TCP/IP) Setting] dialog
- [Port Number]:
Enter a port number used for socket receiving. This is not optional.
- [Default]:
To put the port number back to a default.
For this number, the same value must be set to Agent and Manager (a default value is 31134
for both of Agent and remote Manager).
Do not change the value as long as the default value works.
- [OK]:
Set information is added and this dialog closes.
- [Cancel]:
This dialog closes with no set information added.