User Guide

43
Manager Report (TCP/IP Out-of-Band)
4.3.3
No base setting is required.
Before setting the destination, make configuration of Remote Access Service. Additionally set an entry of
Remote Access Service.
If the entry of Remote Access Service is not set, no destination setting can be made.
For the destination settings, make the following settings.
♦ [Manager (TCP/IP Out-of-Band)] dialog
- [IP address (or host name)]:
IP address (or host name) of the remote Manager is set.
Be sure to specify IP address of the remote Manager.
Tips
If the remote Manager to be set has been already set as the trap destination of
SNMP service, release the setting of SNMP service. Exercise care to avoid
duplicate settings of the same IP address (or host name) for trap destination of
SNMP service after this setting. If duplicate setting is made, more than one alert
will be reported.
- [Entry to Use]:
Select Remote Access Service entry from the list.
- [User]:
To gain Remote Access Service, enter a user name of the selected entry.