Installation Guide

4. Setting Up Windows Server 2008 R2
Express5800/R120e-1M, R120e-2M Installation Guide (Windows)
140
Chapter 1 Installing Windows
3. Click [Next].
Note
Do not use Expert Mode.
4. Enter any name into the team name entry column, and then click [Next].
5. Team Type select the type of team you want to create, and then click [Next].
Note
• 802.3ad Link Aggregation using Link Aggregation Control Protocol(LACP) is
not supported.
• When the FEC/GEC Generic Trunking selected.
The following message will appears, select [OK].
“Verify that the network switch connected to the team members is
configured correctly for the team type.”
• When using Hyper-V, check to "Enable HyperV Mode".