Installation Guide

4. Setting Up Windows Server 2008 R2
Express5800/R120e-1M, R120e-2M Installation Guide (Windows)
123
Chapter 1 Installing Windows
22. Select the necessary driver from the driver list shown, and then click [Next].
When using the N8103-172/173/174 RAID Controller:
[LSI MegaRAID SAS 9272-8i]
When using the N8103-168 RAID Controller:
[LSI MegaRAID SAS 9265CV-8i]
Tips
When N8103-168 is used, the name of the RAID controller that appears on a
screen is different from one that is showed on WebBIOS and Universal RAID
Utility. But it is not a problem.
23. If you used EXPRESSBUILDER DVD, remove it and then insert the OS installation media.
Tips
If you have not replaced the OS installation media after loading the driver, the
following message may appear.
If it appears, replace the OS installation media, and then click [Refresh].
24. When the following window appears, select the disk in which the partition will be created, and then click
Drive options (advanced).
If a partition has already been created, go to step 27.
25. Click [New], enter the partition size into the size input box, and then click [Apply].
Note
When installing the OS to a disk of over 2,097,152 MB (2 TB), the partition size can
only be set to 2,097,152 MB or less.
Tips
When creating a new partition and installing the OS, a 100 MB boot partition is
created. When the following window appears, click [OK].