User Guide

Step 6 In step 3/3, select the setting items of the

Logical Drive to be registered. [Capacity] should be a

value within the Capacity of the Logical Drive to be

created. If the RAID Level of the Logical Drive to be

created is RAID 10, RAID 50 or RAID 60, you do not

have to enter the value. Select [Stripe Size], [Cache

Mode] and [Initialize Mode]. After selecting all the

setting items, click [Next].

Step 7 If you click [Next] in step 3/3, then

[Completing the "Register Logical Drive" Wizard] will

appear. Click [Finish] to register the Logical Drive with

the data selected on the wizard. To change some data,

click [Back].

Step 8 At the completion of the [Register Logical

Drive] wizard, the Logical Drive is registered in the list

of the [Create Logical Drive (Custom)] dialog box.

es.

Step 9 To create other Logical Drives, click [Add]

and repeat steps 4 to 8 by the number of Logical Drives

to be created.

After registering all Logical Drives to create, click

[OK]. Then the dialog box is closed and the registered

Logical Drives are created. Check the contents of the

Logical Drives on the Tree View and/or their properti

However, the Initialize of the Logical Drives having

been created may not be completed. The progress and

result of initializing the Logical Drives can be checked

on the Operation View.