User Guide

Step 4 If you click [Add] in the [Create Logical
Drive (Custom)] dialog box, the [Register Logical
Drive] wizard is started. In step 1/3, select the RAID
Level of the Logical Drive to be registered. After the
selection, click [Next].
Step 5 In step 2/3, the operation varies depending
on the RAID Level selected in step 1/3.
(1) When RAID 0, RAID 1, RAID 5, or RAID 6 is
selected as the RAID Level, select an existing Disk
Array or create another Disk Array.
When you select an existing Disk Array, select the Disk
Array on [Disk Array]. If the RAID Controller contains
Physical Devices of different types, click the type to be
used on [Type]. Next, click the Disk Array node to be
used on [Disk Array]. After the selection, click [Next].
To create a Disk Array to be used newly, click [Add
Disk Array]. Then the [Add Disk Array] dialog box
appears. Check the check boxes of Physical Devices to
be used for the added Disk Array by the number
required for the RAID Level to be created. Then click
[OK]. The newly created Disk Array is added to [Disk
Array] in step 2/3 of the [Register Logical Drive]
wizard.
80
t].
(2) RAID 10, R
AID 50 or RAID 60 is select as the
RAID Level, select Physical Devices used for the
Logical Drive. For RAID 10, check the check boxes of
four Physical Devices. For RAID 50, check the check
boxes of six or larger Physical Devices. Further, the
number of Physical Devices should be even and more
than 5. For RAID 60, check the check boxes of eight or
larger Physical Devices. Further, the number of
Physical Devices should be even and more than 7. After
the selection, click [Nex