User Guide

56
Item
RAI er D View
Item
raidcmd
Description
Enc Enclos Indicates the number of Enclosure inserted Physical Device. losure ure
This value is the original identification value of Enclosure.
Enclosure Position Enclosure Position Indicates the location where Enclosure in which Physical Device is inserted is
connected.
<RAID Viewer>
Internal
Port[Port Number] Position[Position]
<raidcmd>
Internal
Port[Port Number] Position[Position]
Port Number : the number of the Port with which the RAID Controller and
Enclosure is connected
Position : the depth of th
Indicates the number of Slot inserted Physical Device.
e daisy chain (number starting form 1)
Slot Slot
This value is a number starting from 0 or 1.
ID ID Indicates the original identification value of the Physical Device. Use this value to
match Physical Devices managed by the RAID Configuration utility of the RAID
Controller and those managed by the Universal RAID Utility.
The format of the ID varies depending on the types of RAID C
Indicates the type of Physical Device.
ontrollers.
Device Type Device Type
Drive
VD drive
Four possible types are as follows:
HDD : Hard Disk Drive
HDD(SSD) : Solid State
Tape Drive : Tape Drive
CD/DVD : CD drive or D
Interface Interface Indicates the type of the interface to which the Physical Device is connected.
Two possible types are as follows:
SAS : Serial Attached SCSI
SATA : Serial ATA
Indicates the vendorVendor/Model Vendor/Model and model name of the Physical Device.
Firmware Version Firmware Version Indicates the version of the Physical Device.
Serial Number Serial Number Indicates the serial number of the Physical Device.
D or HDD(SSD). This item is indicated when Device Type item is HD
Capacity Capacity Indicates the capacity of the Physical Device in GB.
This item is indicated when Device Type item is HDD or HDD(SSD).
Status Status
evice is incorporated into a Logical Drive to
at the Physical Device is incorporated.
.
pare.
cal Drive.
Indicates the status of the Physical Device.
Five possible status are as follows:
Online: Indicates that the Physical D
operate normally.
Failed: Indicates th
Rebuilding: Indicates that the Physical Device is rebuilding
Hot Spare: Indicates that the Physical Device is set as a Hot S
Ready: Indicates that the Physical Device is not incorporated into a Logi
This item is indicated when Device Type item is HDD or HDD(SSD).
Hot Spare
Information
Hot Spare
Information
Indicates the Hot Spare mode of the Physical Device if it is specified as a Hot Spare.
Two possible modes are as follows:
Global: The Physical Device can be used as a Hot Spare of any Disk Array in the
RAID Controller.
Dedicated: The Physical Device can be used as a Hot Spare of the specified Disk
Array. Also indicates the number of the specified Disk Array.
This item is displayed only when Status is Hot Spare.