User Guide

A
Physical Device icon indicates the power status of the Physical Device when HDD Power Saving function is
enabled.
Icon Meaning Description
Physical Device - Power Saving The Physical Device which Power Status has been moved to Power Saving
by the HDD Power Saving function. “ ” is placed at the lower left of the
Physical Device icon.
Physical Device - Transitioning The Physical Device which Power Status is transitioning from Power
Saving to Power On by the HDD Power Saving function. “
” is placed at
the lower left of the Physical Device icon.
Every node of Dedicated Hot Spare created for more than one Disk Array is located in each node
of Disk Array.
Assigning Physical Device Number
In Universal RAID Utility Ver2.4 and the earlier versions, the number starting from 1 is assigned to each Physical
Device in the ascending order of the ID of Physical Devices. From Ver2.5, the policy has been changed that the
Physical Device number is assigned based on the enclosure number and slot number, in the format “e<enclosure
number>s<slot number>”.
When you install Universal RAID Utility Ver2.5 or later version in the environment where Universal RAID Utility
Ver2.4 has been installed, the order of Physical Devices may change. See the property of the Physical Device to
check the ID of the Physical Device. For details on the property of Physical Devices, see “Referring to Property of
Physical De
vice”.
40
Figure 3 Ph
ysical Device Number
Shortcut Menu
Right-clicking the node of RAID Controller, Disk Array, Logical Drive, Physical Device, Battery, and Flash Backup
Unit allows the shortcut menu to appear. On the shortcut menu, you can display the property and execute the
something operation. See "Menu Bar" for detail of each function.
Universal RAID Utility Ver2.5 or late
r
Universal RAID Utility Ver2.4