User Guide

The following message will be displayed when you operate in the Standard Mode with raidcmd.
Change the RAID System Management Mode to Advanced Mode.
- raidcmd:<RU4004> Invalid RAID System Management Mode.
RAID System Management Mode when startup RAID Viewer
and raidcmd
RAID Viewer
RAID Viewer always starts with Standard Mode. You can change the RAID System Management Mode when
RAID Viewer starts. See "Changing RAID System Management Mode at Start of RAID Viewer".
raidcmd
raidcmd starts with Standard Mode at first after installing Universal RAID Utility. If you want to change the RAID
System Management Mode, you must to use "runmode" command (The RAID System Management Mode does
not change the mode when restart the server).
Changing RAID System Management Mode
The procedure of changing the RAID System Management Mode is below.
RAID Viewer
Use [Advanced Mode] or [Standard Mode] in [Tool] menu.
See “[Tool] menu” for detail.
raidcmd
>
>
> raidcmd runmode -md=s
Changed RAID System Management Mode t "Standard Mode". o
2
>
> raidcmd runmode -md=a
Chan
ged RAID System Management Mode "Advanced Mode". to
1
Step 1
If you want to change from Standard Mode
to Advanced Mode, run "runmode" command with
-md=a parameter.
Step 2 If you want to change from Advanced
Mode to Standard Mode, run "runmode" command
with -md=s parameter.
34