User Guide

BMC Configuration User's Guide
55
Item Description Default Value
Management LAN Management LAN setting
Management
LAN
LAN port to communicate with BMC is displayed. *1 Management LAN
Connection Type Set and display the connection type of managed server.
Auto Negotiation
: Connecting by suitable setting.
100Mbps Full
: Connecting by Full Duplex at speed of 100 Mbps.
100Mbps Half
: Connecting by Half Duplex at speed of 100 Mbps.
10Mbps Full
: Connecting by Full Duplex at speed of 10 Mbps.
10Mbps Half
: Connecting by Half Duplex at speed of 10 Mbps.
Auto Negotiation
BMC MAC
Address
MAC Address is displayed.
DHCP Determine whether to dynamically obtain an IP address from a
DHCP server. If the item is set Enable and applied, BMC set the
value obtained from DHCP server on "IP Address", "Subnet
Mask" and "Default Gateway".
Blade Server:
Enable
Other server:
Disable
IP Address Set the BMC IP address of the managed server.*3 192.168.1.1
Subnet Mask Set the Subnet Mask of the managed server. *2 *3 255.255.255.0
Default Gateway
Set the Default Gateway IP address of the managed server. *3
If you set this item, it is necessary for applying configuration
information that the gateway is connected on network.
0.0.0.0
Dynamic DNS Determine whether to enable/disable of Dynamic DNS. *4 Disable
DNS Server Set the DNS Server. 0.0.0.0