User Guide

- 9-
MANAGEMENT LAN SETTINGS
You can configure basic setting of management LAN settings of BMC for remote
management using Web server function and command line interface of BMC by using some
tools
• Web Browser
Please refer to Chapter 5 for details.
• Server Configuration Utility (Off-line)
Press the F4 key during POST(Power on Self test) or displaying logo immediately
after power on or reset the host system to enter the Server Configuration Utility.
• Server Configuration Utility (On-line Windows/Linux).
It is possible to install it from NEC EXPRESSBUILDER of the host system
attachment.
The item that can be set with each tool is different. Please refer to help of each tool for
details of a set item.
Setting item
Web Browser
Off-line
Server Configuration
Utility
On-line
Server Configuration
Utility
(Windows/Linux)
BMC LAN Setting
Shared LAN Port or
Management LAN Port
NG
OK
NG
Connection Type
OK
OK
OK
IP Address
Subnet Mask
Default Gateway
DHCP
OK
OK
OK
Service Settings
HTTP/HTTPS/SSH
OK
OK
OK
BMC Initialization
NG
OK
OK
Management LAN / Shared BMC LAN
The function for BMC to use operation LAN of the host system is called Shared
BMC LAN.
Select [Enabled] to share a system LAN port with BMC LAN. If you use a
management LAN port for the BMC, select [Disabled]. The management LAN port is
not available when this setting is set [Enabled]. (Default setting is [Enabled]. In
some systems, this menu is not supported. Please refer to the User's Guide of your
host system for more details.)
Notice
If you set [Enabled] the ‘Shared BMC LAN’, the system LAN port that
is shared and BMC are not able to communicate directly. To the
system LAN port that is shared be able to communicate with BMC,
please select [Disabled] to disable ‘Shared BMC LAN’ .