User Guide

- 31-
Correction time limit
10(*8)
10(*10)
Safe Power Capping
Disable
Disable(*10)
Boot Time Configuration(*3)
Disable
Disable(*10)
Performance Mode
Performance
Optimized
Performance
Optimized(*10)
Disable CPU Cores
0
0(*10)
Miscellaneous
Behavior when SEL repository
is full
Overwrite oldest
SEL
Overwrite oldest
SEL (*9)
Access Log HTTP
Disable
Disable
HTTPS
Disable
Disable
SSH
Disable
Disable
Operation
Disable
Disable
Power Restore Delay AC-LINK
Last state
No change
Delay Time
Minimum
configurable time
No change
Platform Event Filtering
Enable
Disable
ESMPRO Management
no change
Disable
Authentication Key
guest
Blank
Redirection (LAN)
Enable
Disable
Automatic Video Recording
Disable
Disable
*1: This menu is shown as “Critical Power Capping” in some host system.
*2: This menu is not supported in some host system.
*3: This menu is not supported in some host system.
*4: This value is “Relative” in some host system or depending on the revision of the BMC.
*5: The default value is ‘settable maximum’ in some host system. The ‘settable maximum’ is
equal to ’Maximum Configuration’ in some host system.
*6: The default value is ‘settable minimum’ in some host system.
*7: The default value is ‘Power Threshold(Pa) -10’ or ‘The settable minimum +10’ ,whichever
is greater in some host system. The ‘settable minimum’ is equal to ‘Minimum Configuration’ in
some host system.
*8: The default value is ‘settable minimum’ in some host system.
*9: This value is “Stop logging SEL” in some host system or depending on the revision of the
BMC.
*10: This value is “Blank” in some host system or depending on the revision of the BMC.
For each System BIOS setting, the possible values and the value of BIOS Initialization are as
the following table.
Item Name Setting Possible Values(*1)
BIOS Initialization
(*2)
BIOS Basic
POST Error Pause
Enable/Disable
Enable
Memory Error
Boot/Halt
Boot
CLI SETUP
Enable/Disable
Disable