User Guide

11
1.4.4 Encrypting of the password
The esmclipasswd command is used for encrypting of the password.
To encrypt the password, enter the command following the command prompt as shown below.
esmclipasswd [Option] <Password>
esmclipasswd Indicates the NEC ESMPRO Manager command line interface command
Option Input an option. There are following types of option.
-h | -help
Display the command syntax of the esmclipasswd command.
When this option is appointed, the password doesn't encrypt.
<Password> Input a password to encrypt.
Examples
When you encrypt the password, please input it as follows.
>esmclipasswd password
{ENC}c10f239c9f7d203fa4424bffb06b6713
The encrypted password is displayed on the screen.