Maintenance Manual

7. Resetting and Clearing the Server

Express5800/R120d-1M, R120d-2M Maintenance Guide

Chapter 1 Maintenance

• Clearing a password

1. Refer to "Getting Started" provided with this server or Chapter 2 (1. Installing Internal Optional Devices)

in "User’s Guide" to remove Top Cover.

2. Confirm the position of Clear Password Jumper.

3. Change jumper swtich settings.

4. Close Top Cover and press POWER Switch.

5. POST halts with the following error message

ERROR

8007: Password Cleared By Jumper.

Press<F1> to resume, <F2> to Setup

6. Press <F2> key to start BIOS Setup Utility and then change the password. Next, execute [Save

Changes and Exit].

7. Turn off the power and return the jumper switch to its original position by following steps 1 and 2.

8. Close Top Cover.