Maintenance Manual

1. POST Error Message
Express5800/R120d-1M, R120d-2M Maintenance Guide
104
Chapter 3 Appendix
Error Message
Cause
Solution
AE15 CPU2_DIMM9 has been
disabled.
A memory error was detected.
CPU2_DIMM9 has been
disabled.
Contact your sales representative.
AE16 CPU2_DIMM10 has been
disabled.
A memory error was detected.
CPU2_DIMM10 has been
disabled.
AE17 CPU2_DIMM11 has been
disabled.
A memory error was detected.
CPU2_DIMM11 has been
disabled.
AE18 CPU2_DIMM12 has been
disabled.
A memory error was detected.
CPU2_DIMM12 has been
disabled.
AE81 CPU1_DIMM1 with error is
enabled.
An error in CPU1_DIMM1 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE82 CPU1_DIMM2 with error is
enabled.
An error in CPU1_DIMM2 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE83 CPU1_DIMM3 with error is
enabled.
An error in CPU1_DIMM3 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE84 CPU1_DIMM4 with error is
enabled.
An error in CPU1_DIMM4 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE85 CPU1_DIMM5 with error is
enabled.
An error in CPU1_DIMM5 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE86 CPU1_DIMM6 with error is
enabled.
An error in CPU1_DIMM6 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE87 CPU1_DIMM7 with error is
enabled.
An error in CPU1_DIMM7 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE88 CPU1_DIMM8 with error is
enabled.
An error in CPU1_DIMM8 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE89 CPU1_DIMM9 with error is
enabled.
An error in CPU1_DIMM9 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8A CPU1_DIMM10 with error is
enabled.
An error in CPU1_DIMM10 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8B CPU1_DIMM11 with error is
enabled.
An error in CPU1_DIMM11 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8C CPU1_DIMM12 with error is
enabled.
An error in CPU1_DIMM12 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8D CPU2_DIMM1 with error is
enabled.
An error in CPU2_DIMM1
occurred, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8E CPU2_DIMM2 with error is
enabled.
An error in CPU2_DIMM2 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
AE8F CPU2_DIMM3 with error is
enabled.
An error in CPU2_DIMM3 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.