Installation Guide

91
♦ Configuration information file; Configuration information report function
To detect failure in advance, this function permits you to gather and report regularly the server
Configuration information and any of various logs.
Sending information is gathered in accordance with the following conditions.
<Path: %EsmDir%¥AlertMan¥Work¥WebReprt>
<File name: AMHTPHBI>
[Configuration]
- TimeOut=xxxx *Specifies a time out period (sec).
- MaxSize=0 *Specifies an attachable maximal log size (KB).
When ˝0 ˝ is specified, unlimitedly possible.
[Tools]
- Command=˝c:¥xxx¥xxx¥xxx.bat˝ *When ˝˝ (blank) is given, the tool does not operate.
- LogFile=˝c:¥xxx¥xxx¥xxx.log˝
- Directory=˝c:¥xxx¥xxx˝
[Schedule]
- ScheduleType=every month *Specify ˝every month ˝ or ˝every week ˝.
- ScheduleDay=xx
- ScheduleTime=xx:xx
1. In [Configuration] section, specify parameters.
- In ˝Timeout ˝, specify number of seconds to stop collecting failure information.
- In ˝MaxSize ˝, specify maximal size of collecting failure information log (count by KB).
- In the case of 0 “Timeout”,”MaxSize is unlimited.
2. In [DefaultTools] section, specify log information for the case of not specifying
individual log commands.
- In ˝Command ˝, specify the absolute path of log command.
- In ˝Directory ˝, specify the absolute path where the log-gathering command is executed.
- In ˝LogFile ˝, specify the absolute path. When a folder is specified, the files under it
(includes subfolders) are collected.