User Guide

16
2.3
Scheduling function of Alert Report
- Report scheduling function:
Reportable time periods can be specified.
- Retry function:
If reporting fails, retry of reporting is done. Retry is specified for each reporting destination with the
retry interval and maximum retry time.
2.4
Report function of Alert
- Manager report (SNMP, TCP/IP) function:
This function reports the alert using SNMP or TCP/IP function. Report contents include a detailed
message, support method, and alert type. A report can be issued to the manager under LAN
environment (In-Band report) as well as under WAN environment (Out-of-Band report) using
Remote Access Service. This function is only available for Agent.
- Internet Mail function:
This function uses SMTP protocol to report by the Internet Mail. This function requires Mail Server
to support SMTP. Report contents include a detailed message, support method, and alert type.
The report contents cannot be selected but the send message can be edited.
- Pop-up message function:
A pop-up message is displayed on the screen when the alert occurs. The report contents include
a detailed message, support method, and alert type. A message title can be edited and the report
contents can be selected at the time of setting. The pop-up message always displays only one
message on the screen. Each message is sequentially displayed.
- Printer output function:
An alert results in output to the printer when an alert occurs. Output to the network printer is also
available. The report contents include a detailed message, support method, and alert type. The
message can be edited and the report contents can be selected.