Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
90
Chapter5 Setup for the NEC Storage
5.1 Register NEC Storage on NEC ESMPRO Manager
You can register the NEC Storage with similar way of registering the ordinary managed component.
Use either of the two methods to register NEC Storage.
 Manual Registration
This method requires the operator to directly enter the NEC Storage's information such as the "Floating
IP Address" and to perform "Check Connection".
 Auto Registration
This method automatically searches the network for managed components and NEC Storage, and
registers them.
TIPS:
 NEC ESMPRO Manager distinguishes the NEC Storage from ordinary managed
component by "Check Connection".
 The managed component name on the NEC ESMPRO Manager is set to the disk array
name that is set in iSMClient. You can change the managed component name on
"Connection Setting".
(1) Manual Registration
(1)-(a) Click the group name for the NEC Storage on the "Component Link" view or "Group" tree.
(1)-(b) Click the "Manual Registration" from "Add Component" of "Group Information" tab.
(1)-(c) Input the following items on the "Manual Registration" view.
--"Component Name"
Specify the NEC Storage name on the NEC ESMPRO Manager.
--"IP Address"
Enter the Fixed IP address of "
Floating IP Address" of the NEC Storage.
--"System management"
-"Management"
Select the "Registration".
-"SNMP community name"
Enter the "SNMP community name" specified on iSMClient.
--"RAID system management"
-"Management"
Select the "Unregistration"
--"NEC ExpressUpdate "
-"Updates via NEC ExpressUpdate Agent"
Select the "Unregistration"
-"Updates via Management Controller"
Select the "Unregistration"
--"Management controller management (Common)"
-"Management"
Select the "Unregister".