Setup Guide

NEC ESMPRO Manager Ver.5 Setup Guide
88
(1) Manual Registration
(1)-(a) Click the group name for the EM card on the "Component Link" view or "Group" tree.
(1)-(b) Click the "Manual Registration" from "Add Component" of "Group Information" tab.
(1)-(c) Input the following items on the "Manual Registration" view.
--"Component Name"
Specify the EM card name on the NEC ESMPRO Manager.
--“Common Setting”
- "OS IP Address"
Enter the Fixed IP address of the EM card.
--"System management"
-"Management"
Select the "Registration".
-"SNMP community name"
Enter the "SNMP community name" specified on EM card.
--RAID system management
-"Management"
Select "Unregistration".
--NEC ExpressUpdate
-"Updates via NEC ExpressUpdate Agent"
Select "Unregistration".
-"Updates via Management Controller"
Select "Unregistration".
--"Management controller management (Common)"
-"Management"
Select the "Registration".
-"Management Type"
Select "BMC".
- "Authentication Key"
Enter the "NEC ESMPRO Manager (former NEC DianaScope) user password" that is set on the
EM card.
--"Management controller management (LAN)"
- "IP Address 1"
Enter the Fixed IP address and subnet mask of the EM card.
(1)-(d) Click "Add".
(1)-(e) Click "Connection Setting" from "Setting" tab of the managed component. And Click “Check
Connection”.
NEC ESMPRO Manager will execute "Check Connection" and collect the information for the
management.
When the "Check Connection" is completed, the NEC ESMPRO Manager starts to control the EM
card.
(2) Auto Registration